Industrial Uses
Packaging
Application Data

Pelseal® Technologies produces a variety of adhesives and coatings made from Viton® and other fluoroelastomers in a range of viscosities, colors and capabilities to meet almost any industrial need. The following describe some of the products we offer. For additional information on products, prices, and custom formulating for your specific needs, .

CLICK HERE

PLV 2000: 40 cps viscosity, black, two-part adhesive/coating

PLV 2002: 400 cps viscosity, blue, two-part adhesive/coating

PLV 2036: 22000 cps viscosity, blue, two-part adhesive/coating

PLV 2038: 400 cps viscosity, white, two-part adhesive/coating

PLV 2040: Aerosol spray, black, one-part adhesive/coating in 12-ounce aerosol can

PLV 2050: 3500 cps viscosity, black, two-part adhesive/coating

PLV 2100: 600 cps viscosity, black, two-part adhesive/coating

OTHER: Custom formulated liquid fluoroelastomer adhesives/coatings designed to meet your specific application

ACCELERATOR #4.: Curing agent which is added to the adhesives/coatings prior to application.

Back to Top

Our fluoroelastomer adhesives and coatings have been employed in a wide variety of industrial applications, including:

• Door gasket adhesives on industrial ovens

• Adhesives for splicing and bonding fluoroelastomer gaskets and O-rings

• Coatings for equipment subjected to corrosive fluids

• Coatings for metal and rubber rollers subjected to high temperatures

• Adhesives for bonding rubber gaskets to metal

• Adhesives used in jet engine maintenance and other aerospace applications

• Acid-resistant coatings for industrial flooring

• Adhesives in battery manufacturing

Back to Top

Products are sold in quart, gallon, 5-gallon, 30-gallon and 55-gallon containers. PLV 2040 is available in 12-ounce aerosol cans. Samples are available upon request

Back to Top

Pot Life. Once mixed, our adhesives/coatings have a useful life of approximately 8 hours at 75^o F (24^o C)

Application Methods. Common methods include application by brushing, dipping, rolling or spraying.

Substrate Preparation. A clean dry surface is essential for maximum adhesion. Gritblasting or degreasing with oil-free solvents is recommended.

Successive Coats. Products adhere well to themselves. Allow products to dry before applying additional coats. Drying time will be approximately 5 minutes, depending on coating thickness, temperature and humidity.

Curing. Products will cure in approximately 24 hours when exposed to ambient temperatures. Faster cures are possible by slowly heating dried coatings.

Shelf Life. 12 months from Date of Manufacture for unaccelerated base material.

Clean Up. MEK, MIBK and Acetone can be used.

Safety: Please use in accordance with Material Safety Data Sheet

Back to Top

Viton® is a registered trademark of DuPont.