Sealants and Caulks
Pelseal® Technologies, a sister company of Pelmor Laboratories, produces a variety of sealants and caulks in a range of viscosities, colors and capabilities to meet almost any industrial need. The following pages describe some of the products we offer. For additional information on products, prices and custom formulating for your specific needs, .
|
 |
Pelseal®2012: Two-part, black sealant/caulk. Highly viscous material suitable for vertical and overhead applications.
Pelseal®2077: One-part black sealant/caulk. Viscous but self-levelling material supplied in resealable caulking cartridges. Suitable for horizontal applications.
Pelseal®2112: Two-part, black sealant/caulk. Viscous but self-levelling material suitable for horizontal applications.
Pelseal®3114: Two-part, white sealant/caulk. Viscous but self-levelling material suitable for horizontal applications.
OTHER: Custom formulated liquid fluoroelastomer sealants/caulks designed to meet your specific application.
ACCELERATOR #4: Curing agent which is added to the sealants/caulks prior to application.
Fluoroelastomer Sealants/Caulks: Industrial Uses
Our fluoroelastomer sealants and caulks have been employed in a wide variety of industrial applications, including:
- Hazardous material abatement - joint sealants for steel and concrete secondary containment areas.
- Adhesives for flue duct expansion joints used in power plants.
- Acid-resistant joint sealant for industrial flooring.
- Door gasket adhesives on industrial ovens.
- Adhesives for splicing and bonding fluoroelastomer gaskets and O-rings.
- Adhesives for bonding rubber gaskets to metal.
- Adhesives used in jet engine maintenance.
 Applying PLV2000 as a primer for concrete cracks in concrete containment area. |
 Pelseal® 2112: sealing cracks in concrete secondary containment area H2SO4 (Sulfuric Acid). |
Packaging
Products are sold in quart and gallon containers. Pelseal®2077 is available in 11-ounce and 20-ounce caulking cartridges. Samples are available upon request
Application Data
Pot Life. Once mixed, our sealants/caulks have a useful life of approximately 4 hours at 75o F (24o C).
Application Methods. Common methods include trowelling by hand, extruding from caulk cartridge or hand-filled bulk gun.
Substrate Preparation. A clean dry surface is essential for maximum adhesion.
Successive Coats. Products adhere well to themselves. Allow for solvent evaporation prior to making multiple coats, or blisters may result.
Shelf Life. 12 months from Date of Manufacture for unaccelerated base material.
Clean Up. MEK, MIBK and Acetone can be used.
Safety: Please use in accordance with Material Safety Data Sheet
VITON® is a registered trademark of DuPont-Dow Elastomers, L.L.C.
